XVC770AE 3BHE006414R0001 Power module processor of the ABB controller
Brand ABB Height 19mm rated current 50mA Color Green
Protection level adapted to motor power Applicable site Material code
IP45 28KW Power industry HIEE401782R0001
Part number XVC770AE 3BHE006414R0001 Applicable pipe is imported, weight 1.6kg can be sold nationwide
XVC770AE 3BHE006414R0001 Power module processor of the ABB controller
For the servo drive can choose the operating mode: open loop mode, voltage mode, current mode (torque mode), IR compensation mode, Hall speed mode, encoder speed mode, tachometer mode, analog position loop mode (ANP mode). (Not all of the above patterns exist in all drive models)
Open-loop mode
The input command voltage controls the output load rate of the driver. This mode is used for brushless motor drives and is the same voltage mode as brushed motor drives.
Voltage mode
The input command voltage controls the output voltage of the driver. This mode is used for brushed motor drives and is the same as the open loop mode for brushless motor drives.
Current mode (torque mode)
The input command voltage controls the output current (torque) of the driver. The driver adjusts the load rate to maintain the command current value. If the drive can work with a speed or position loop, this mode is generally included.
IR compensation mode
Enter a command to control the motor speed. The IR compensation mode can be used to control the speed of the motor without speed feedback device. The driver adjusts the load rate to compensate for changes in output current. When the command response is linear, the precision of this mode is not as good as that of the closed-loop speed mode in the case of torque disturbance.
Hall velocity mode
Input command voltage to control motor speed. This mode uses the frequency of the hall sensor on the motor to form a speed closed loop. Due to the low resolution of the hall sensor, this mode is generally not used for low-speed motion applications.
Encoder speed mode
Input command voltage to control motor speed. This mode uses the frequency of the encoder pulse on the motor to form a speed closed loop. Due to the high resolution of the encoder, this mode can be used for smooth motion control at various speeds.
Speed measuring machine mode
Input command voltage to control motor speed. In this mode, the speed closed loop is formed by using the analog tachometer on the motor. Since the voltage of the DC tachometer is analog continuity, this mode is suitable for the best speed control. Of course, at low speeds, it is also susceptible to interference.
Simulated position loop mode (ANP mode)
Input command voltage control motor rotation position. This is actually a variable speed mode that provides position feedback in an analog device (such as an adjustable potentiometer, transformer, etc.). In this mode, the motor speed is proportional to the position error. It has faster response and smaller steady-state error.
XVC770AE 3BHE006414R0001 Power module processor of the ABB controller
ABB TC625
ABB TC630
ABB TET106 11355-0-6050000
ABB TK516
ABB TU515
ABB TU804-1
ABB TU810V1
ABB XI16E1
ABB XM06B5
ABB XO16N1-B20 XO16N1-C3.0
ABB YB560100-EA S3
ABB YYT107A
ABB 07KT97H3
ABB 086329-003
ABB 086329-004
ABB 086345-504
ABB 086351-004
ABB 12KM02E-V0002
ABB 3BHB003154R0101
ABB 3BHB004027R0101
ABB 3BHE039203R0101
ABB 3HAB8101-19 DSQC545A
ABB 3HAB8859-1/03A
ABB 3HAB9271-1/01B
