PM633 Robot system card ABB module controller PM645B PM632
Brand ABB Color Standard Application Industrial height 175mm rated current 240mA
Protection Level IP45 Suitable for motor power 356KW Applicable Site Power Industry Material Code GJR2391500R1220 Power industry HIEE401782R0001 Part No. PM645B
Applicable pipe 2 Whether imported is weighing 4.38 kg can be sold nationwide
PM633 Robot system card ABB module controller PM645B PM632
When connecting the CI520/CI522/CI526 to the bus, the communication interface is connected to
PM645B with modem cable TK515/TK593/TK803 TC512 modem. Unit with integrated modem
Connect directly to the bus cable.
When using a single medium, the bus cable must be connected to the line 1 connector on the Advant
PM645B Controller 70 (PM810) and S800 I/O station (CI810).
There should be enough space under the modem to allow for a minimum bending radius
Cable (R in the picture above). This radius depends on the cable type, usually
100 mm cables for equipment and indoor industrial environments. For underground and
Submarine cables with a radius equal to or greater than 200mm (≈8 “) are usually required.
In case of uncertainty, contact the cable manufacturer.
Please contact the cable manufacturer to find out how to make the cable
Installing optical connectors on cables is a delicate job that should be done
Carried out by experts. Cable providers can usually recommend such specialists.
The optical connector is STx4 type.
When the communication interface of Advant controller 70 is enabled, its CDP is configured.
Since the communication interface cannot be a bus administrator, it is used in
The current master bus administrator. When Advant controller 70
Start and connect to the bus, or when configured as the master bus administrator
Start.
At startup, all leds on the front of the Advant controller 70 are initialized in hardware. When the R (RUN) indicator is on, the workstation is running.
Station address Before starting the Advant controller 70, it must be assigned a station number. The PM645B selects the station number through the address switch on the front of the PM810. Station numbers must be between 1 and 79. Refer to the Advant Controller 70 documentation for more information. The station address has nothing to do with the order of the stations along the bus route. They simply represent the physical address used to refer to a particular site. The Advant controller station number is used as an interface on the Advant Fieldbus 100 hardware address for communication.
PM633 Robot system card ABB module controller PM645B PM632
ABB 07KT97B
ABB 07KT97F1
ABB 200900-004
ABB 35AE92
ABB 3BHB003689
ABB 3HAB3700-1
ABB 3HAB8101-8/08Y
ABB 3HAC025466-001
ABB 3HAC031683-001
ABB 3HAC14550-2/09A
ABB 3HAC14550-4/04B
ABB 3HAC17326-1/02
ABB 3HAC17346-1/01
ABB 3HAC4776-1/1
ABB 3HNA000512-001
ABB 3HNE00313-1
ABB 61615-0-1200000
ABB AI610
ABB AI835
ABB AX411/50001
ABB BB510
ABB CI520V1
ABB CI610
ABB CI615
ABB CI626
ABB CI626V1
ABB CI810B
