Output/input signal processing APBU-44C 64669982G
Brand ABB Color Standard Application Industrial height 377mm rated current 429mA
Protection Level IP45 Suitable for motor power 326KW Application Site Power Industry BOM Number GJR2391500R1220 Power industry HIEE401782R0001 Part Number APBU-44C 64669982
Applicable pipe 2 Whether imported is weighing 4.68 kg can be sold nationwide
Output/input signal processing APBU-44C 64669982G
The production of PLC control cabinet is a strict and cumbersome process, because it plays a big role in the system control, and can not tolerate any carelessness. In the production process, AIye intelligence has passed strict program testing. Reasonable material selection, long service life, reliable. It can also support customization to meet requirements. Let’s take a look at the production process of PLC control cabinet.
PLC control cabinet production process:
1. 2.0mm thick cold-rolled steel plate is used at the front and back doors of PLC control cabinet, and 1.5mm thick cold-rolled steel plate is used at both sides.
2. The front door and back door of the PLC control cabinet are designed with glass doors (the glass door should observe the status of the PLC and the main equipment on the cabinet door to ensure the overall appearance of the cabinet door, and the multiple control cabinet doors should be consistent), and open the rear two doors.
3. Cover is installed 100mm from the bottom of the cabinet to the bottom of the box. The cover plate is divided into front and back. There shall be 200mm×100mm discharge holes near the left side of the grooves on both sides of each cover plate.
4, the equipment components should be installed in the front and back arrangement of the control cabinet, that is, the double-sided vertical beam arrangement, the front longitudinal beam between the front and back beams is between 100mm and 300mm, the front door, the rear vertical beam and the back door are between 400mm.
5. The exhaust fan is installed in the top center of the PLC control cabinet. Install the cabinet top before and after know light, and install the metering cabinet top after know light.
6. The vertical vertical slots near the cabinet side panels on both sides of the cabinet should be close to the cabinet side panels to ensure effective clean space inside the cabinet.
7. The s7-300/400 bottom plate in the PLC cabinet is installed on the insulated plywood, and the bottom plate is insulated with the cabinet body.
8. The components in the PLC cabinet and other components (as laid out with the cabinet) should conform to the installation drawings.
9. The wiring inside the cabinet is designed according to the drawings. The terminal in the cabinet should be short-circuited
Output/input signal processing APBU-44C 64669982G
ABB INNIS21
ABB INNPM12
ABB KUC720AE
ABB KUC720AE01
ABB MSR04X1
ABB MVR 0.44-10KA
ABB NPCT-01C
ABB PCD244A101
ABB PDD200A101
ABB PDD205A0121
ABB PFCL201C 10KN
ABB PFCL201C 20KN
ABB PFTL101A 1.0KN
ABB PFXA401SF
ABB PM864AK01-eA
ABB PM866A-2
ABB PU515A
ABB REF610
ABB RET650
ABB RK682011-BA
ABB SA801F
ABB SAFT183VMC
ABB SC510
ABB SK616001-A
ABB SNAT602TAC
ABB SNAT603CNT
ABB SNAT604IFS
