IS215UCVHM06A – VME GE controller card
Brand GE Color Standard Application Industrial height 316mm rated current 481mA
Protection Level IP45 Suitable for motor power 116KW Application Site Power Industry BOM Number GJR2391500R1220 Power industry HIEE401782R0001 Part number IS215UCVHM06A
Applicable pipe 2 Whether imported is weighing 4.23 kg can be sold nationwide
IS215UCVHM06A – VME GE controller card
The IS215UCVHM06A is a VME processor control card developed by GE. It is part of the Mark VI control system. It is a dedicated single-slot board that plays a crucial role in the control and communication of larger systems. It uses an Intel ultra-low-voltage CeleronTM processor running at 1067 MHz (1.06 GHz) and comes with 128 MB of flash memory and 1 GB of synchronous dynamic random access memory (SDRAM). The compact design effectively utilizes its resources to contribute to the overall functionality of the system. One of the features of UCVH is its dual Ethernet connection. The board is equipped with two 10BaseT/100BaseTX Ethernet ports, each with an RJ-45 connector. These Ethernet ports act as gateways for network communications, facilitating connectivity and data exchange inside and outside the system.
The first Ethernet port plays a key role in establishing a connection to the Universal Device Host (UDH), which is used for configuration and point-to-point communication. UCVH uses this port to interact with UDH, allowing the configuration of various parameters and Settings that are critical to system operation. In addition, the first Ethernet port facilitates direct communication between peer devices within the network, facilitating the seamless exchange of information and collaborative operations.
The second Ethernet port on UCVH runs on a different IP logical subnet. This separation ensures clear communication boundaries and helps to effectively manage network traffic. The Ethernet port has several uses, one of which is its ability to work with Modbus, a communication protocol widely used in industrial automation. In addition, the port can be used in dedicated Ethernet Global Data (EGD) networks to enhance the security and efficiency of data transfer within specific components of the system.
Configuring the second Ethernet port is done through the Toolbox, a set of software tools that help with system administration and customization. During startup, the controller validates the configuration Settings established through the toolkit to ensure that they are consistent with hardware functionality and the expected network architecture. This verification process ensures that the controller functions optimally according to the configured parameters.
IS215UCVHM06A – VME GE controller card
GE DS200SDCIG2AEB
GE DS200SDCIG2AHB
GE DS200SLCCG1ACC
GE DS200SLCCG1AEE
GE DS200UDSAG1ADE
GE DS215DMCBG1AZZ03A
GE DS6800CCIE1F1D
GE HE693RTD600
GE IC600CB524M
GE IC600CB527M
GE IC660BBD023
GE IC660EBD025
GE IC693CHS392
GE IC693DSM302-RE
GE IC693MDL231
GE IC693MDL340
GE IC693MDL646
GE IC693MDL654
GE IC693MDL655
GE IC693PWR321
GE IC693PWR330G
GE IC695CRU320
GE IC697ACC722B
GE IC697ALG320
