GE IC600CB527M Alpha I series spindle amplifier
Brand ABB Color Standard Application Industrial height 351mm rated current 561mA
Protection Level IP45 Suitable for motor power 128KW Application Site Power Industry BOM Number GJR2391500R1220 Power industry HIEE401782R0001 Part Number IC600CB527M
Applicable pipe 2 Whether imported is weighing 4.69 kg can be sold nationwide
GE IC600CB527M Alpha I series spindle amplifier
The analog input signal in the inverter usually refers to a voltage signal of 0 ~ 10V/5V or a current signal of 0 ~ 4 ~ 20 mA; These analog input signals can be given externally through the terminal, and when the inverter is connected to the PCB, these analog input signals can also come from the PLC analog output signals, as shown in Figure 3. When making analog connections, note:
(1) Impedance matching. According to the input impedance of the inverter, the output module of the PCC is selected to realize the impedance matching between the two.
(2) Voltage range. When the voltage signal range of the inverter and the PCB is different (such as the input signal of the inverter is 0 ~ 10V, and the output voltage signal range of the PLC is 0 ~ 5V); When the output signal voltage range of one side of the PLC is 0 ~ 10V and the input voltage signal range of the inverter is 0 ~ 5V), it is necessary to use a series resistor for voltage division to ensure that the two are within the normal voltage range
Work to avoid voltage overlimit which may damage the device.
(3) Using shielded cables or stranded cables. For the frequency converter and the PCB, the weak current control signal (voltage 0 ~ 5V/10V, current 0/4 ~ 20mA, etc.) is susceptible to interference from external strong signals, and appropriate shielding measures are taken for the control signal. The common way is to use shielded cables for shielding; For long distance control circuits, twisted cables should be used, and the twisted cable spacing should be as small as possible.
(4) The main and control cables are routed separately. During the actual connection, pay attention to the separate wiring of the main and control cables and the distance between them. To ensure that the main circuit side interference and noise does not affect the control circuit.
GE IC600CB527M Alpha I series spindle amplifier
IC200MDL240K
IC200PWB001A
IC200PWR001D
IC3645LXCD1
IC3645IC600CB524MXCD1
IC3645LXCD1TT
IC600CB527M
IC660BBA020
IC660BBA104 6231BP10910
IC660BBD022
IC660BBD023
IC660BBD025
IC660BBD101
IC660EBD020
IC660EBD025
IC660ELB912
IC660ELB912G
IC660ELB921M
IC660ELD100A
IC660TBA026
IC660TBD024
IC660TBD025
IC660TSA100
IC670CBL001
IC670CHS001
IC670CHS001E
IC670CHS002
IC670CHS101
IC670CPU350
IC670GBI002
IC670GBI102D
IC670MDL240J
IC670MDL240K
IC670MDL241J
IC670MDL640
IC670MDL644
IC670MDL730
IC670MDL740
IC670MDL740J
IC670MDL930
IC670MDL930J
