DSBC172 57310001-KD determines the transmission signal by element input parameters
Brand ABB Color Standard Application Industrial height 246mm rated current 358mA
Protection Level IP45 Suitable for motor power 159KW Application Site Power Industry Material Code GJR2391500R1220 Power industry HIEE401782R0001 Part Number DSBC172 57310001-KD
Applicable pipe 2 Whether imported is weighing 4.88 kg can be sold nationwide
DSBC172 57310001-KD determines the transmission signal by element input parameters
af100/mb90 rely on a centralized bus manager, DSBC172 57310001-KD bus manager function is more complex, more requirements, for example: apc site can not be used as a bus manager, they do not contain the bus manager function. In order to make communication between APCs via af100/mb90 possible, each solution (standalone and embedded) can be used to arrange the bus host of af100/mb90, when the apc starts to execute their application, the bus host must be operational, otherwise, the bus host must be operational. When a locally configured data set is not acknowledged by the bus manager within a specified time limit, the data set function block in the apc branch will enter an error state. If the system has only apc sites and no masterpiece is connected to mb90 or ac450 to af100, a separate bus manager should be installed.
abb dcs communicates with the drive system (such as aCV700 / dCV700) by relying on the drrtra (drive transmit) and drrec (drive reciver) elements shown in Figure 4.
The drrtra (drive transmit) element DSBC172 57310001-KD is used to transmit a given data set to the abb drive controller and the definition of the control word and command word signals for selecting the drive signal is given in the application drive software description. The drrtr element can generate different types of periodic information supported by the transmission communication protocol, the destination of the signal is selected by the transmission signal, the drrtr element can also write parameters, and the overload of the drrtr can be detected during the normal phase.
The drrec (drive reciver) element is used to receive signals and control word values from the abb drive controller. These signals are defined in the application drive software description. The drrec element is only the period information supported by the transmission connection protocol, and the received data source is selected by determining the transmission signal and signal index by the element input parameters. The drrec element can also access parameters, and drrec overload can be detected during the configuration phase.
DSBC172 57310001-KD determines the transmission signal by element input parameters
ABB SPA-ZC22
ABB SPAD346C
ABB SPCJ4D34-AA
ABB TA524
ABB TB521-ETH
ABB TC625
ABB TC630
ABB TET106 11355-0-6050000
ABB TK516
ABB TU515
ABB TU804-1
ABB TU810V1
ABB XI16E1
ABB XM06B5
ABB XO16N1-B20 XO16N1-C3.0
ABB YB560100-EA S3
ABB YYT107A
ABB 07KT97H3
ABB 086329-003
ABB 086329-004
ABB 086345-504
ABB 086351-004
ABB 12KM02E-V0002
