Digital output of ABB DSQC509 data acquisition system architecture module
Brand ABB color Standard Application Industrial height 325mm rated current 470mA
Protection Level IP45 Suitable for motor power 356KW Application Site Power Industry BOM Number GJR2391500R1220 Power industry HIEE401782R0001 Part Number DSQC509
Applicable pipe 2 Whether imported is weighing 4.88 kg can be sold nationwide
Digital output of ABB DSQC509 data acquisition system architecture module
The robot DC power supply unit DSQC506 converts the input 220V AC to the output 24V and 15V DC, which is the robot drive system. IO board unit, safety board. Shenkou measuring board and other equipment power supply; The computer DC power supply unit DSQC505 converts 24V DC to the corresponding 5v.33v.12V DC to provide power for the robot’s internal computer system. The main computer monitors all DC outputs through the system monitoring bus SMBus; Battery pack unit – DSQC508 is composed of three parts: control card, battery pack and test resistor. The control card is the battery effect processing management board – the battery pack is composed of rechargeable nickel-chromium battery with temperature sensor, input 24V DC, output 21.6V DC, when the machine needs to be shut down the input AC voltage is less than 18OV, and more than 20ms, the battery pack begins to discharge, to provide power for the robot system backup. The robot controls the charging state through temperature detection, and checks the battery status by testing resistance discharge white once a week. The main computer monitors the power and charging status of the battery pack through the system monitoring bus. Battery function and battery status.
The robot computer system consists of the main computer board DsQC500, the axis computer board DSQC503LO computer board DSQC522 and the bottom plate DsQC501. Fast hard disk DSQC518. Computer DC power supply unit DSQC505, battery pack unit DSQC508, cooling fan, etc. Main computer.Axis computer.LO computers are connected via baseplate, and the fast hard disk is mounted on the main computer board. The computer system supports 1-2 LO computer boards and 1-3 axis computer boards. Each axis computer board *** controls more than 7 axes. Adjust the speed and torque of each shaft, the shaft computer receives position data from the main computer, and measures the current position signal of the plate die at the center port. The computer uses these data to calculate the adjusted output position signal to the drive system. When the computer system is working, it communicates with the 駆 dynamic system through the external basic connecting plate DSQC504, outputs the motion command, runs the actuator, receives the feedback signal of the measuring board, calculates the moving position of the robot, and issues the next – command.
Digital output of ABB DSQC509 data acquisition system architecture module
ABB IMFECI2
ABB INIIT03
ABB INIIT13
ABB INIT03
ABB INNIS21
ABB INNPM12
ABB KUC720AE
ABB KUC720AE01
ABB MSR04X1
ABB MVR 0.44-10KA
ABB NPCT-01C
ABB PCD244A101
ABB PDD200A101
ABB PDD205A0121
ABB PFCL201C 10KN
ABB PFCL201C 20KN
ABB PFTL101A 1.0KN
ABB PFXA401SF
ABB PM864AK01-eA
ABB PM866A-2
ABB PU515A
ABB REF610
ABB RET650
ABB RK682011-BA
ABB SA801F
ABB SAFT183VMC
ABB SC510
ABB SK616001-A
ABB SNAT602TAC
ABB SNAT603CNT
ABB SNAT604IFS
ABB SNAT609TAI
ABB SNAT634PAC
ABB SPAD346C3
ABB SPBLK01
ABB SPBRC300
ABB SPDSI22
ABB SPHSS13
ABB TK457V050
ABB TP830-1
ABB TPPB-02
ABB TU830V1
ABB UAC318AE
