DI610 Automation processor module

Brand ABB Color Standard Application Industrial height 287mm rated current 375mA
Protection Level IP45 Suitable for motor power 345KW Application Site Power Industry BOM Number GJR2391500R1220 Power industry HIEE401782R0001 Part number DI610
Applicable pipe 2 Whether imported is weighing 4.22 kg can be sold nationwide

DI610 Automation processor module

The 4 channel relay module is a full height module
Four relay outputs are available. Any number of 4-channel relays
Modules can be placed in
Transient data interface module. Each output of 4 –
The channel relay module can be programmed independently
Execute the voting logic.
The 4-channel relay module is used on each relay included
Alarm drive logic.
The programming of alarm driven logic uses AND and OR logic,
And you can use alarm inputs (alert and danger status),
Not normal, or coming from any monitor channel or any
Combination of monitor channels in the rack. You can
Program the Alarm Drive to meet your application needs
Using 3500 rack configuration software.
specification
Typical input power consumption 5.8W Output OK LED indicator is on when the module is started and functions normally. TX/RX LED transmission and reception. Flashing light indicates correct
Communication between this module and other modules within the rack. If the CH alarm indicator is on, the trunk channel is in the alarm state.

DI610 Automation processor module

ABB DSQC633
ABB DSRF197K01
ABB DTCC901B
ABB DTDX991A
ABB FPX86-9329–C
ABB GCC960C102
ABB GCC960C103
ABB GDC801B101
ABB HAC319AEV1
ABB ICSI16E1
ABB IMASI23
ABB IMBLK01
ABB IMDS014
ABB IMDSI14
ABB IMDSM04
ABB IMFECI2
ABB INIIT03
ABB INIIT13
ABB INIT03
ABB INNIS21
ABB INNPM12
ABB KUC720AE
ABB KUC720AE01
ABB MSR04X1
ABB MVR 0.44-10KA
ABB NPCT-01C
ABB PCD244A101
ABB PDD200A101